Swinging Balance Beam
Product code: H-1240
Product features:
Recommended for public playgrounds, kindergartens, and schools as a balance and skill-developing play equipment for young children. The structure consists of 3 main elements: two support frames and a swinging beam suspended on a 16 mm wire-reinforced rope net.
- Horizontal support beam length: 2350 mm
- Wooden support leg length: 900 mm
The product complies with MSZ EN 1176-1:2018 playground safety standards and is certified accordingly.
Materials and construction:
- Wooden parts: Laminated pine beam, visible quality. Made from technically dried, finger-jointed laminated pine, where structural and optical defects are removed. With weak points eliminated and layered construction, it complies with DIN EN 14080:2013 standard. Strength rating: GL24h. Boards are AB quality, free of loose or black knots. Planed, sanded on all sides, splinter-free, and with rounded edges. Surface treatment is eco-friendly, UV-resistant, applied in two layers with water-based thick-layer glaze and a natural fungicidal agent. All screws are protected with rounded plastic covers that cannot be dismantled without tools.
- Rope elements: Vandal-resistant, twisted, steel-cored, polyethylene-coated ropes, 16 mm in diameter, UV-resistant. At junctions, plastic compression nodes are used, and the ropes are fixed to the frame with pressed aluminum sleeves.
- Metal support legs: Made from bent, powder-coated carbon steel plate, fixed to the wooden structure. Equipped with a stopper to prevent direct contact of the wood with the ground, thus avoiding rot. Attached with at least 4 long steel bolts per leg. The powder coating provides durable, eco-friendly corrosion protection.
Installation:
The four support legs are placed into dug holes so that the horizontal beams stand level and parallel, at a height of 90 cm above ground. The holes are filled with concrete, stopping 20 cm below surface level. After thorough compaction of the concrete, the remaining space is filled with soil or loose material. Due to the low fall height, additional impact-absorbing surfacing is not required; maintained grass is sufficient.
- Fall height: 95 cm
- Fall zone: 21 m²
Related product documents:
