Hexagonal Climbing Tower with Nest
Product code: H-1236
Product features:
The climbing tower is a six-sided multifunctional playground structure. One side features a climbing net made of 16 mm steel-reinforced rope, while the opposite side is equipped with a climbing wall fitted with holds of various shapes and sizes. On the remaining two sides, steel box sections connect the other legs, supporting a rope ladder and a snake bar. Older children can climb the rope net and wall to reach the nest located at the top of the tower, while younger children can practice climbing on the snake bar and rope ladder.
Recommended for children aged 3–14 years.
The product complies with MSZ EN 1176-1:2018 standards and comes with playground compliance certification.
Materials and structural design:
- Wooden parts: Laminated pine beams of visible quality, technically dried and finger-jointed. Weak points and visual defects are eliminated. Meets DIN EN 14080:2013 standards, strength class GL24h. Boards are AB quality, free from loose or black knots. All surfaces are planed, sanded, splinter-free, and rounded.
- Support legs: Bent sheet carbon steel with powder coating, fixed to the wooden structure. A buffer prevents direct ground contact, protecting the wood from rot. Attached with at least four long steel bolts. Primed and powder-coated with eco-friendly corrosion protection.
- Rope components: Vandal-resistant, steel-reinforced ropes with polyethylene coating, UV-resistant. Rope junctions secured with pressed plastic nodes and aluminum sleeves.
- Climbing wall: Waterproof plywood with special resin climbing holds.
- Additional elements: Powder-coated steel snake bar, reinforced rope ladder, polyethylene UV-resistant plastic components, resin climbing holds, and powder-coated steel grips.
- Safety features: All bolts are covered with tamper-proof, rounded plastic caps.
Installation:
The equipment is anchored by concreting the powder-coated steel support legs. When preparing the concrete foundations, ensure that they finish at least 20 cm below ground level. After the concrete has cured (minimum 10–15 days depending on weather), the equipment can be safely used.
- Fall height: 190 cm (According to MSZ EN 1777, an impact-absorbing surface such as sand or rubber tiles is required.)
- Fall zone: 36.8 m²
Related documents:
