Square Climbing Tower with Fireman’s Pole and Hexagonal Climber
Product code: H-1234/3
Product features:
The climbing tower is a four-sided multifunctional playground structure. One side features a climbing net made of 16 mm steel-reinforced rope, while the opposite side is equipped with a climbing wall fitted with holds of various shapes and sizes. On one of the remaining sides, a six-rung ladder climber (with 30 cm spacing between rungs) provides older children with a challenging climbing element, while the opposite side includes a fireman’s pole where younger children can practice climbing and sliding.
The product complies with MSZ EN 1176-1:2018 standards and comes with playground compliance certification.
Materials and structural design:
- Support legs: Bent sheet carbon steel with powder coating, fixed to the wooden structure. A buffer prevents direct ground contact, protecting the wood from rot. Attached with at least four long steel bolts. Primed and powder-coated with the most modern, eco-friendly corrosion protection method.
- Fireman’s pole and six-rung climber: Made of powder-coated steel tube.
- Wooden parts: Laminated pine beams of visible quality, technically dried and finger-jointed. Weak points and visual defects are removed. Meets DIN EN 14080:2013 standards, strength class GL24h. Boards are AB quality, free from loose or black knots. All surfaces are planed, sanded, splinter-free, and rounded. Treated with eco-friendly, weather-resistant, UV-protected, two layers of water-based stain and a natural antifungal agent.
- Climbing wall: Made of waterproof plywood with special resin climbing holds.
- Climbing net: Vandal-resistant safety rope, 16 mm thick, steel-reinforced, polyethylene-coated, UV-resistant, with pressed plastic junctions.
Installation:
The equipment is anchored by concreting the powder-coated steel support legs. When preparing the concrete foundations, ensure that they finish at least 20 cm below ground level. After the concrete has cured (minimum 10–15 days depending on weather), the equipment can be safely used
- Fall height: 180 cm (According to MSZ EN 1777, an impact-absorbing surface such as sand or rubber tiles is required.)
- Fall zone: 25 m²
Related documents:
