Square Climbing Tower with Snake Bar and Horizontal Bar
Item number: 
H-1234-1

Product code: H-1234/1 – The climbing tower is a four-sided, multifunctional playground structure.

Square Climbing Tower with Snake Bar and Horizontal Bar
419 100 Ft
Details

Square Climbing Tower with Snake Bar and Horizontal Bar

Product code: H-1234/1

Product features:
The climbing tower is a four-sided multifunctional playground structure. One side features a climbing net made of 16 mm steel-reinforced rope, while the opposite side is equipped with a climbing wall fitted with holds of various shapes and sizes. On one of the remaining sides, a horizontal bar offers older children the chance to practice pull-ups and strength exercises, while the opposite side features a snake bar, allowing younger children to practice climbing.

The product complies with MSZ EN 1176-1:2018 standards and comes with playground compliance certification.

Materials and structural design:

  • Support legs: Bent sheet carbon steel with powder coating, fixed to the wooden structure. A buffer prevents direct ground contact, reducing the risk of rot. Connected with at least four long steel bolts. Primed and powder-coated using the most modern, environmentally friendly corrosion protection method.
  • Snake bar: Powder-coated steel tube.
  • Wooden parts: Laminated pine beams of visible quality, technically dried and finger-jointed. Weak points and visual defects are eliminated. Meets DIN EN 14080:2013 standards, strength class GL24h. Boards are AB quality, free from loose or black knots. All surfaces are planed, sanded, splinter-free, and rounded. Surface treatment is eco-friendly, UV-resistant, and highly weather-resistant, finished with two layers of water-based wood stain and a natural antifungal agent.
  • Climbing wall: Made of waterproof plywood with special resin climbing holds.
  • Climbing net: Vandal-resistant safety rope, 16 mm thick, steel-reinforced, polyethylene-coated, UV-resistant, with pressed plastic junctions.

Installation:
The four support posts and the snake bar are fixed into concrete. When preparing the foundations, ensure the concrete ends at least 20 cm below ground level. After thoroughly compacting the concrete, an appropriate impact-absorbing surface must be created within the fall zone.

  • Fall height: 180 cm (According to MSZ EN 1777, an impact-absorbing surface such as sand or rubber tiles is required.)
  • Fall zone: 25 m²

Related documents:

Data
Product Code:
H-1234/1
Material:
Knot-free laminated pine wood, powder-coated steel tube elements, 16 mm steel wire-reinforced rope, resin climbing stones, powder-coated steel support leg
Packaging unit:
5 piece, longest: 2550 mm, heaviest: 30 kg, required space: 2550×1270×500 mm
Size:
Base area: 1270×1270 mm, height (from ground): 1950 mm
Recommended age group:
For children aged 3–14 years
Fall height:
1.9 m, fall space: min. 4,97×4,97m (5×5 m)
Certification standards:
MSZ EN 1176-1:2018
Color options:
vailable in the color combination shown in the picture
Impact absorption:
sand or rubber flooring
Weight:
120 kg/db
Similar products
Reviews
Be the first to write a review!
Write a review
Square Climbing Tower with Snake Bar and Horizontal Bar
Square Climbing Tower with Snake Bar and Horizontal Bar
419 100 Ft
WebShop System